I-High Speed ​​Air-cooled ATC 9.0kw Spindle Motor ISO30 CNC Spindle ye-Cnc Router

I-9.0KW CNC Air Cooling ATC spindle motor ithengiswa ngentengo eshibhile, isivinini esingu-24000rpm, i-800Hz freguency, 3 isigaba 220V ACoperating voltage, ISO30 Tool Holder ehlinzekwa ngumkhiqizi waseChina u-HOLRY. Thenga ngokuqondile ngentengo ephansi kanye nekhwalithi ephezulu.

Isici se-SPAF-9.0 ATC Spindle

• I-Spindle Motor engu-9.0kw enohlelo lokupholisa umoya kanye nesibambi samathuluzi se-ISO30/BT30 siqinisekisa ukusebenza kahle.

• Ukusabela okusheshayo, umthamo oqinile wokugcwala, umsindo ophansi, nokunemba okuphezulu komshini.

• Amabheringi e-ceramic asezingeni eliphakeme, aphumayo aphuma ngaphansi kuka-0.01mm, abhorekile angaphansi kuka-0.005mm.

• Amabhola e-ceramic ebanga le-P4 asetshenziswa njengama-spindle bearings, athuthukisa impilo yesevisi ngaphansi koguquko olunesivinini esikhulu.

• Igcotshwe ngamafutha, amelana nezinga lokushisa eliphakeme lama-200 degrees.

• Ukuvala okuqinile kanye nedizayini yokuvikela uthuli enezen

9.0kw Spindle Motor Application

Lolu chungechunge lwezinjini zokuphotha zikagesi ezipholiswe ngamanzi ikakhulukazi zihambisana nokushayela okuguquguqukayo noma imishini yokuqopha, kanye nemishini yomzila we-CNC, futhi asetshenziselwa ukuphrofayilila okunesivinini esikhulu, ukubhola, ukusika, ukuqopha nokugaywa kokhuni, insimbi, amapulasitiki, igwebu, irabha, nezinye izinto.

Qaphela: I-spindle motor kanye ne-VFD kuzofanelana. Ukucaciswa kanye nezilungiselelo zepharamitha ze-VFD zizofanelana nemingcele ye-spindle motor. Uma kungenjalo, izoshisa i-spindle motor uma izilungiselelo zingalungile.

9.0kw Spindle Motor Specification

INDLELA	I-SPAF-9.0
AMANDLA	9.0KW
I-VOLTAGE	220V/380V
CURRENT	33.6/19.5A
POLE	4
IFREQUENCY	400Hz/800Hz
ISIVIVINYO	12000RPM/24000RPM
I-TOQUE	7.16Nm
ISIBAmbi LWETHULUSI	ISO30/BT30
ISISINDO	36KG

Imininingwane

Amacebiso: Iyini i-Spindle Motor engu-9.0kw?

I-spindle motor ibizwa nangokuthi yi-high-speed motor, ibhekisela ekuguqukeni kwemoto engaphezu kuka-10000 RPM AC. Inezinzuzo zejubane elisheshayo, usayizi omncane, ongasindi, ukusetshenziswa kwempahla ephansi, umsindo ophansi, nokudlidliza okuphansi, okusetshenziselwa ikakhulukazi ukhuni, i-aluminium, itshe, i-hardware, ingilazi, i-PVC, nezinye izimboni. Ngenxa yokusetshenziswa kwayo okubanzi nomsebenzi wokucophelela, isivinini esisheshayo, kanye nekhwalithi yokucubungula enhle kakhulu, okwenza enye injini evamile ingakwazi ukuhlangabezana nezidingo zobuchwepheshe zemoto yokuphotha. I-spindle motor idlala indima ebalulekile enqubweni yokukhiqiza yezimboni, ngakho-ke idume kakhulu emhlabeni wonke.

Amathiphu Okuphepha Okusebenzisa i-HOLRY CNC Spindle Motors

1. I-electric spindle motor kanye ne-VFD zizofanelana. Ukucaciswa kanye nezilungiselelo zepharamitha ze-VFD zizofanelana nemingcele ye-spindle motor, futhi izoshisa injini yokuphotha uma izilungiselelo zingalungile.

   
   

2. Ngaphambi kokusebenzisa injini yokupholisa epholiswe ngamanzi, izoqinisekisa ukuthi isistimu yomjikelezo wokupholisa isebenza ngendlela evamile futhi ukusebenza ngaphansi kwezimo ezingezizo zokupholisa akuvunyelwe. Umthamo wamanzi okupholisa ubalwa ngokwelitha eli-1/ngomzuzu, ukugeleza okuncane kwamanzi okupholisa akukho ngaphansi kwamalitha ama-5/ngomzuzu, ipayipi lamanzi okupholisa kanye nombhobho kufanele uxhumeke ngendlela ethembekile futhi akukho ukuvuza.

   
   

3. Uketshezi olupholisayo kufanele luhlanzeke futhi lungabi nagrisi futhi izinga lokushisa libe phakathi kuka-5-30 ℃. Indawo yokupholisa kufanele ipholise ngamandla lapho izinga lokushisa lendawo lingaphezu kuka-30 ℃. I-lathe enembayo idinga uketshezi olupholile olunokushisa okungashintshi okungu-20 +/-2℃.

   
   

4. Ngesikhathi sokugcinwa kanye nokuthuthwa kwe-spindle motor, isimo samafutha esivinini esikhulu ngaphakathi kwe-bearing sizoshintsha. Umsebenzisi uzoyigijima ngesivinini esiphansi kuqala ngokuqala ngesivinini esiphansi kakhulu senjini yokuphotha imizuzu engama-30 bese kuba imizuzu engama-20 kuyo yonke imijikelezo engu-3000. Uma kungenjalo kuzoba nomsindo ongajwayelekile, umsindo, ukushisa nezinye izinto, okuzothinta impilo yokuthwala uma i-spindle motor iqalwa ngqo ngesivinini esikhulu. Ngesikhathi sokugcina isikhathi eside, injini yokuphotha izosebenza (ngesivinini esiphansi) imizuzu eyi-15-30 kanye ngesonto okungenani.

   
   

5. I-collet, i-nati kanye nembobo ye-taper yangaphakathi kufanele igezwe ihlanzeke lapho kufakwa ama-blade enjini yokuphotha ukuze kugwenywe noma yimuphi umthelela ekunembeni. Isibambo se-blade kufanele sifakwe ku-collet ngaphezu kuka-15mm.

   
   

6. Ngomshini wansuku zonke, i-spindle motor izofudunyezwa, igijime imizuzu engu-15-20 lapho isivinini somshini sifinyelelwa bese senza imishini enembile. Kungcono ukumisa injini yokuphotha amahora amabili nsuku zonke ukuze ibuyise ukukhathala kwayo komshini futhi yelule isikhathi sayo sokuphila.

   
   

7. Akukho ukushaya ikhava yokugcina yenjini yokuphotha. Akukho ukushaya i-collet nekhanda le-blade lapho ususa ama-blade. Akukho okushaqisayo noma ukushayisana ngesikhathi sokuthutha, ukugcinwa kanye nokusebenzisa, ikakhulukazi ukuphela kwenjini yokuphotha.

   
   

8. I-spindle motor izosebenza ngendlela ekhethiwe.

   
   

9. Injini yokuphotha izofakwa futhi ilungiswe ngokuya ngemidwebo nemiyalo efanele.

   
   

10. Izinga lokushisa kufanele libe phakathi kuka-22-25 ℃ uma kusetshenziswa umshini wokupholisa amanzi.

    
    

11. Injini yokuphotha ithatha isikhiya somusi futhi umthombo wegesi ngeke usetshenziswe kuze kube yilapho usudlulile isihlukanisi samanzi samafutha kanye nesihlungi esomile. Ukucindezela komoya kungu-0.2-0.25Mpa futhi ukunemba kokuhlunga kungu-5μm, ngaphandle kwalokho kuzodala umonakalo ekuthwaleni.

I-Air Cooled ATC 9.0kw Spindle Motor FAQ

Iyini injini ye-spindle epholile ye-ATC engu-9.0kW?

I-ATC epholile emoyeni (Automatic Tool Change) engu-9.0kW spindle motor iyinjini enamandla amakhulu esetshenziswa emishinini ye-CNC. Ifaka isistimu yokupholisa umoya ukuze kugcinwe izinga lokushisa elilungile futhi isekela izinguquko zethuluzi elizenzakalelayo ukuze lisebenze kahle.

Yiziphi izinzuzo zokupholisa umoya ngaphezu kokupholisa amanzi?

Ukupholisa komoya kuqeda isidingo sepompo yamanzi noma isistimu yokupholisa, kunciphisa ukulungiswa. Iphatheka kalula futhi kulula ukuyimisa, ikakhulukazi ezindaweni lapho ukupholisa amanzi kungase kungenzeki khona.

Imaphi amandla kagesi kanye nemvamisa edingwa yinjini?

Amamotho amaningi okupholisa ngomoya we-ATC 9.0kW asebenza kugesi wezigaba ezintathu, ngokuvamile adinga u-380V/50Hz noma 220V/60Hz. Ngaso sonke isikhathi hlola imininingwane yemoto ukuze uthole izidingo eziqondile.

Yiziphi izinhlelo ezijwayelekile zale motor yokuphotha?

Le moto yokuphotha ivamise ukusetshenziswa kumarutha e-CNC ukwenza amapulangwe, ukwenza insimbi, amapulasitiki, kanye nomshini oyinhlanganisela. Amandla ayo kanye nokunemba kwayo kuyenza ifanelekele izimboni ezifana nokukhiqiza ifenisha kanye ne-aerospace.

Iyini isivinini esiphezulu se-spindle?

Iningi lama-spindle motors apholile emoyeni e-ATC 9.0kW anesivinini esiphezulu esingu-24,000 RPM. Lesi sivinini siyalungiseka ukuze sivumelane nezinto ezihlukene kanye nezinqubo zomshini.

Iluphi uhlobo lwesibambi esisetshenziswa yi-spindle?

Injini ivamise ukusekela abanikazi bamathuluzi be-ISO noma be-HSK, njenge-ISO30 noma i-HSK63, kuye ngemodeli ethile. Laba baphathi bavumela izinguquko zamathuluzi ezisheshayo nezinembayo.

Hlobo luni lokunakekelwa oludingwa injini?

Hlanza njalo imigudu yomoya futhi uqinisekise ukugeleza komoya okungavinjelwe. Ngezikhathi ezithile hlola ama-bearings nezinye izakhi ukuthi zigugile yini bese uzishintsha njengoba kudingeka. Landela imihlahlandlela yomkhiqizi ngezikhawu zokulungisa.

Ingabe i-inverter (VFD) iyadingeka ukuze usebenze?

Yebo, i-Variable Frequency Drive (VFD) ibalulekile ukulawula ijubane lokuphotha namandla. Qinisekisa ukuthi i-VFD iyahambisana nokucaciswa kwemoto yokuphotha.

Ungakanani izinga lomsindo wenjini yokuphotha epholiswe ngomoya?

Ama-spindles apholile emoyeni avame ukuba nomsindo kunalawo apholiswe ngamanzi ngenxa yefeni. Amazinga omsindo angasukela ku-70-80 dB kuye ngomthwalo nendawo.

I-automation yokushintsha ithuluzi isetshenziswa kanjani?

Uhlelo lwe-ATC lusebenzisa ama-actuator wepneumatic noma uhydraulic ukwenza izinguquko zamathuluzi ngokuzenzakalelayo. Idinga i-compressor yomoya kanye nomagazini wamathuluzi ohlanganiswe emshinini we-CNC.